Control, control, control. The FoilS2 is a pure slalom and speed foil sail for the competition rider who is searching for the fastet and most technically advanced foil sail out there. The high aspect ratio design allows for perfect aerodynamics. We have optimised the sail for maximum average speed. The more controlled and equal the speed of your flight is the easier you can move closer to the edge of what’s possible in modern foil racing. You want the perfect foiling machine?! Here comes the PATRIK FoilS2.
|FRONT- / BACKHANDED||5/10|
|WEIGHT / DURABILITY||5/10|
(+- 1 cm)
|Ideal mast||Alternative softer mast||Price|
|3.6 still in R&D||355||151||SDM 340 – IMCS 15||/||£1039|
|4.2 still in R&D||385||159||SDM 380 – IMCS 17||/||£1060|
|4.8||409||169||SDM 400 – IMCS 19||SDM 380 – IMCS 17||£1086|
|5.4||431||175||SDM 420 – IMCS 21||SDM 400 – IMCS 19||£1112|
|6.0||451||183||SDM 440 – IMCS 23||SDM 420 – IMCS 21||£1138|
|6.6||473||191||SDM 460 – IMCS 25||SDM 440 – IMCS 23||£1164|
|7.2||495||199||SDM 480 – IMCS 29||SDM 460 – IMCS 25||£1190|
|7.8||519||203||SDM 500 – IMCS 32||SDM 480 – IMCS 29||£1216|
|8.4||539||213||SDM 520 – IMCS 33||SDM 500 – IMCS 32||£1242|
Racing is a “no-compromise” area in Patrik Diethelm’s dictionary. Every detail is being optimized with maximum performance in mind.
All the panels inside the sleeve are made by the thickest monofilm available which provides the best stiffness and a locked profile where the main shape is. The main panels are 5 MIL clear monofilm from B7 to B4 and then 4 MIL above that batten. Why always clear? Because this material is few grams lighter than its coloured alternative! For the foot panel and a minimalistic area around the clew we kept a good impact resistance 5 MIL red x-ply materials. That are is often stressed when your sail rubs on the deck grip of the ultra-wide racing boards. Along the leech, you find again 5 MIL (closer to the clew) and 4 MIL (closer to the top) clear x-ply to keep the rear edge of the sail stable and aerodynamically clean even in hi-wind choppy conditions. For the mast sleeve, we reduced the amount of PE fabric material (which stretches more and absorbs little amounts of water) and maximized the 2 MIL x/scrim-ply area instead, which is super light but still with the highest number of fibres per sqm. – so this material is perfect to spread the load across the whole sail.
Make sure to set the required downhaul indicated by the colour changes on the batten sleeves. Use the clew trim options to adjust the sail to the wind conditions.
Delivery – 3 weeks